Cara Flash Huawei Menggunakan SDCard (Recovery Mode)

These are the instructions to install or Flash OTA on Huawei Smartphone and Tablets using the Force Upgrade Method.

Requirements: Your Huawei Smartphone or tablet should have at least 30-40 percent of device battery in order to perform the Flashing Process.

How to Force Upgrade Huawei Devices

Step 1: Download the Huawei Firmware (OTA) on your computer. After Downloading the OTA Firmware, you may or May not need to extract the firmware on your Computer.
[*] If the zip package looks like the following screenshot, then you need to extract it on your computer or on your device.
huawei ota package
[*] If the zip package looks like the following screenshot, then you don’t have to extract it on your computer.
huawei ota zip package
Step 2: If in case the OTA firmware name is NOT update.zip then you need to rename it to update.zip.
Step 3: Now, Move the update.zip firmware to the root of SD card memory (connect your device to the computer using the USB cable to copy the update.zip file to the SD card or if your computer is having SD card reader then also you can copy the update.zip package).
Step 4: Assuming that you have successfully copied the update.zip package to the Device SD memory. Now, Switch OFF or Power OFF your Huawei Device.
power off huawei
Step 5: Now, you need to boot into the recovery memory of your device.
To boot into the recovery mode (old huawei devices): Press the Power key, wait one second and press the Volume Up key, it should boot into the recovery mode.

Comments

Popular posts from this blog

How to Flash or Update Firmware on Motorola Moto G (1st gen-2013) With RSD Lite.

Cara Flash Firmware Lenovo A6000 Plus

How to Flash Firmware on Bricked Motorola Moto E (1st gen-2014) With RSD Lite Tool.